NICOBAND INSIDE is a self-adhesive sealing and waterproofing bitumen polymer tape. Produced by unilateral application of anti-adhesion to the polymer film self-adhesive bitumen-polymer binder consisting of bitumen, SIS (styrene-isoprene-styrene) polymer modifiers and special adhesive additives. As a protective layer on the other side of self-adhesive non-woven polypropylene used (Spunbond).

The material is intended for indoor use. Suitable for:

• Sealing joints in the ventilation system (ducts, floors exible ducts).
• Sealing of various pipes in cold areas.
• The product adjacencies to the walls and other protruding parts for sealing the interior floors of the roll and mastic materials.
• The unit is waterproof floors in the rooms (bathrooms, kitchen) without the use of protective cement sand screed. Directly on the material can be glued ceramic tile.

Also used where the material will be closed from the effects of UV-rays:

• The unit capillary cutoff for masonry and wood construction.
• Vapor barrier and waterproofing assembly seams at the organization of heat insulation.

METHOD OF APPLICATION:

The surface must be flat, dry and clean. Cut the tape to length, remove the protective film, stick the tape to desired area and press it firmly. If the temperature is below +5°C it is necessary to first keep NICOBAND INSIDE in room temperature for at least 12 hours before application. The use of the material at sub-zero temperatures requires additional heating of the surface.

The use of NICOBAND INSIDE is not recommended on hot vertical surfaces or on surfaces with a temperature above +80°C.